fbpx

Fuel Polisher

Designed to eradicate water, sediment, bugs and bacteria which accumulate in stored diesel and oil.
Fleury HC Fuel Polishers

Design Specifications

  • Enclosed in Compact, Weather Proof Stainless Steel Cabinet (Insulated)
  • Sizes Vary to meet Customer Needs
  • Ideal for Removal of Particles, Degradation Products and Water
  • Optimal Single Pass Filtration Performance
  • Pump Protection Using a Y-Strainer
  • Visual Pressure Gauge Indicator for Necessary Filter Element Change Out
  • Reverse Flow Prevented by Check Valves
  • Electric Control Panel with Start, Stop & Rotary Isolator

Proven Performance

Particle Removal:

All Filter Inserts have the following filtration degree:

  • 3μm absolute: 98.7% of all solid particles >3μm – 0.8μm nominal: 50% of all solid particles
  • 0.8μm are retained in each pass.

The dirt holding capacity is 4-16 L of evenly distributed solids.

Degradation Products:

Oxidation products, resin / sludge, and varnish are retained by the cellulose material, which will retain appr. 4-16 kg of oil degradation products.

Water Removal:

The water absorption potential is up to 50% (i.e. 2000-8000 ml H20) of the total contaminant holding capacity.

Designed For Use On

  • Diesel Fuel
  • Hydraulic Oil
  • Lubrication Oil
  • Gear Oil
  • Transformer Oil
  • Turbine Oil
  • Compressor Oil
  • Phosphate Ester
  • Water Glycol (Coolants)
  • Biodegradable Oil
  • Quenching Oil

Product Options

HIGH CAPACITY FUEL POLISHER X4

Pump Type Gear Pump MZ
Pump Flow per hour 380-1920 L
Power consumption 0.15-2.2 kW
Pump inlet pressure max. 0.5bar
Pressure drop max 1.8bar
Design pressure, filter 4bar
Oil temperature max 80°C
Filter insert cellulose 4 pcs
Ambient temperature max 40°C
Dry weight (incl. Cabinet) 228 – 257kg
Operation weight, wet (incl. Cabinet) 261 – 290kg
Overall size min.
max.
H1530 x W750 x D640
H1530 x W900 x D750

See Optional Extras below **

HIGH CAPACITY FUEL POLISHER X1

Pump Type Gear Pump MZ
Pump Flow per hour 30-600 L
Power consumption 0.15-2.2 kW
Pump inlet pressure max. 0.5 bar
Pressure drop max 1.8 bar
Design pressure, filter 4 bar
Oil temperature max 80°C
Filter insert cellulose 1 pcs
Ambient temperature max 40°C
Dry weight (incl. Cabinet) 137kg
Operation weight, wet (incl. Cabinet) 145kg
Overall size min. H990 x W750 x D640

Fleury HC Fuel Polishers** Optional Features for the X4:

  • Air Cooling System with Thermostat for Extreme Heat to +50°C
  • Fully Enclosed for Extreme Cold Weather to -30°C
  • Fully Enclosed with Electric Control Panel Only
  • Fully Enclosed with Isolating Switch for Operating Remotely

Product Images

Contact Us

Let us know if you would like for information about any of our products.

 

  • This field is for validation purposes and should be left unchanged.

Our Clients

Gas-Networks-Ireland
SSE Renewables
Irish Naval Service
General Electric Ireland

Backed by